JPR 8550.1 - Nasa

More documents

Recommendations

Info

JSC Environmental Compliance Procedural Requirements JPR No. 8550.1A XXXX.X Effective Date: Johnson Space Center • Environmental Compliance Program Expiration Date: Expiration Date: Page Number 3/25/2011 3/25/2016 [Leave Blank] Page 114 of 123 Appendix A—Glossary of Terms and Acronyms A.1 ACM Asbestos Containing Material A.2 Alternate Fueled Vehicles Vehicles designed to operate on fuels other than gasoline, such as propane, natural gas, and ethanol. JSC is required to reduce our annual petroleum consumption by at least 20% by end of FY 2005 under Executive Order 13149. In addition, 75% of light-duty vehicle acquisitions shall be AFVs to meet the Energy Policy Act of 1992 (EPAct). A.3 BMP Best Management Practice; Measures taken related to specific activities or processes which employees are required to follow in order to achieve compliance or pollution prevention (generally related to storm water pollution prevention). A.4 CATEX Categorical Exclusion A.5 Comprehensive Procurement The Environmental Protection Agency’s list of designated Guidelines (CPG)........................................ products that are commercially available that contain recycled or recovered content with the minimum recycled content percentages that Federal agencies are required to procure. A.6 Containment System or structure designed to prevent the accidental release of materials. A.7 Contract Program Manager The on-site individual (contractor) assigned overall responsibility to manage the execution of a contract. A.8 EA Environmental Assessment A.9 EIS Environmental Impact Statement A.10 Emission Control Equipment Equipment that controls the operating conditions of the emission source equipment, such as temperature or pressure controls, fuel controls, air mix controls, dust collectors, fume collectors, scrubbers, carbon vent collectors and emission monitoring equipment. A.11 Emission Source Equipment Equipment that generates an air vent or emission such as a boiler, cooling tower, fueled generator, painting, sandblasting or wood cutting operations A.12 Employee Any person who is assigned to work on-site at JSC (includes NASA owned or leased portions of EF, SCTF and EPFOL). Verify correct version before use at http://server-mpo.arc.nasa.gov/Services/CDMSDocs/Centers/JSC/Home.tml. JSC Form JF2420B (MS Word August 28, 2006) (Revised May 30, 2007)
JSC Environmental Compliance Procedural Requirements JPR No. 8550.1A XXXX.X Effective Date: Johnson Space Center • Environmental Compliance Program Expiration Date: Expiration Date: Page Number 3/25/2011 3/25/2016 [Leave Blank] Page 115 of 123 This includes prime contractors and their subcontractors, visiting scientists, international partners, co-op students, and personnel from other NASA centers who are temporarily assigned to work at JSC. A.13 Environmentally Preferable Purchasing products or services that have a lesser or Purchasing .................................................. reduced effect on human health and the environment when compared with similar competing products or services. A.14 EO JSC Environmental Office A.15 EPA United States Environmental Protection Agency A.16 ERD Environmental Resource Document A.17 Excess Emission Any emission in excess of regulatory requirements or reportable quantities which are 100 pounds per chemical or as specifically listed in the regulations A.18 FONSI Findings of No Significant Impact A.19 HQ NASA Headquarters; usually HQ EMD Environmental Management Division A.20 ISW Industrial solid waste (ISW) includes all solid, semi-solid, liquid, and containerized gas that is discarded. Regular plant trash is not included in this waste. A.21 IU Industrial User discharging wastewater to the sanitary sewer. A.22 LEED Leadership in Energy and Environmental Design. A ―green building‖ rating system that provides a complete framework for sustainable site development including water savings, energy efficiency, materials selection, and indoor environmental quality. A.23 Life Cycle Analysis Comprehensive examination of a product’s environmental and economic aspects and potential impacts through its lifetime, including raw material extraction, transportation, manufacturing, use, and disposal. A.24 Life Cycle Cost Amortized annual cost of a product, including capital costs, installation costs, operating costs, maintenance costs, and disposal costs discounted over the lifetime of the product. A. 25 MSDS Material Safety Data Sheets Verify correct version before use at http://server-mpo.arc.nasa.gov/Services/CDMSDocs/Centers/JSC/Home.tml. JSC Form JF2420B (MS Word August 28, 2006) (Revised May 30, 2007)
Page 1 and 2:
Johnson Space Center Procedural Req
Page 3 and 4:
JSC Environmental Compliance Proced
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64: JSC Environmental Compliance Proced
Page 113: JSC Environmental Compliance Proced
Page 123: JSC Environmental Compliance Proced
show all

JPR 8550.1 - Nasa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?