Picture Perfect 4.6 User Manual - UTCFS Global Security Products

94
Picture Perfect 4.6
User Manual
Table 45. Operator form fields (continued)
Field
Change Password
Description
Displays the Password dialog used to set the operator's password. The * character displays
as you type; the actual password is not visible. When changing an existing password, the old
password must be entered before being prompted to enter the new one. A text box lists the
password rules that must be followed according to the parameters specified in the
Parameters form.
Notes:
• This dialog is not available if the operator does not have permission to change his or her
password.
• When adding a new operator, you must enter a password before saving the record.
• Passwords are restricted to contain only 7-bit ASCII characters such as: a-z, A-Z, 0-9.
Characters such as: à, ê, æ, cannot be used within passwords.
• If an operator does not remember the “Old Password” when trying to set a “New
Password”, the system administrator can change that operator's password by entering
the system administrator’s password in the “Old Password” field for that operator.
Related procedures
To create, edit, or delete an Operator record:
1. Select Control, Operators, and then Operators tab.
2. Refer to Creating, editing, deleting, and printing records on page 36.