Picture Perfect 4.6 User Manual - UTCFS Global Security Products

336
Picture Perfect 4.6
User Manual
How to set up a Two Man Rule (2MR) controlled space
You need to complete the following forms to set up standard 2MR for an area:
• Reader form: To configure the area readers.
• Door form: To configure the doors in the area.
• Facility Profile form: To enable Occupancy Control.
• Area form: To enable Occupancy Counting and 2MR for the area.
To set up the area readers:
1. From the Configuration menu, select Doors and Readers, and then click the Readers tab.
2. From the toolbar, click Find to locate the reader record you want to set up.
3. On the Function tab, under Logical Reader Function, enable the appropriate radio button:
APB In, APB Out, T&A In, or T&A Out.
Note:
In an area with Occupancy Control enabled:
• All readers in the area must be assigned one of these logical functions: APB In, APB Out, T&A In, or T&A
Out.
• APB readers must be set to Global. Timed APB is not allowed.
• The logical reader function T&A In/Out is not allowed for any reader.
Figure 155.Readers form: Reader Function
4. On the Reader Description tab, under Micro, verify that all readers in the area are assigned
to the same micro.
5. On the Options tab, under Number of Badges, verify that all readers are set to Single.