Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 18
Advanced features
337
Figure 156.Readers form: Options
6. Optional: If you want to activate a DO (such as a blinking light) between the first and second
required badge swipes, click Two Man Rule Output and select the output to be triggered.
7. Click Save and exit the Readers form.
To set up the area doors:
Note:
The door sensor input and the door output must be physically connected to the same micro.
1. From the Configuration menu, select Doors and Readers, and then click the Doors tab.
2. From the toolbar, click Find to locate the door record you want to set up.
3. On the Inputs and Outputs tab, click Door Sensor Input.