Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 9
Area management
175
Defining readers
Use the Readers form to define how each reader operates and to associate the reader with an area,
a micro, and input group so that the system can process reader activity.
Example
A bank vault employs the added security offered by the Two Man Rule option, requiring a minimum
of two occupants in the area. The door to the vault room is controlled by a reader. The vault reader is
wired to the following address: 01 (Micro 1) - 1 (Reader board 1) -00 (the address on the board).
Figure 76.Readers form
Fields and controls
Table 80. Readers form fields
Field
Description
Board
Address
Description
Type a reader description up to 60 characters long. Example: 00-1-00 LOBBY DOOR
Type the board number of the reader board where this reader is connected.
See Table 68, M/PX-2000 wiring chart - Outputs on page 154, Table 69, Micro 5 (M5) wiring chart -
Outputs on page 154, and Table 70, DirecDoor wiring chart - Inputs and Outputs on page 155 of
Chapter 8 Device management.
Type the physical address of this reader on its reader board.
See Table 68, M/PX-2000 wiring chart - Outputs on page 154, Table 69, Micro 5 (M5) wiring chart -
Outputs on page 154, and Table 70, DirecDoor wiring chart - Inputs and Outputs on page 155 of
Chapter 8 Device management.