Picture Perfect 4.6 User Manual - UTCFS Global Security Products

178
Picture Perfect 4.6
User Manual
Table 80. Readers form fields (continued)
Field
Description
Authorization Required
Select Yes to designate a reader that displays a photo in a popup window
beside the Activity Monitor and requires an operator to unlock a door.
Select No to designate a reader that displays a photo in a popup window
beside the Activity Monitor and unlocks a door without operator intervention.
Note:
The Yes and No buttons are not available unless Swipe and Show
is Enabled.
Access cannot be granted through readers defined as
Authorization Required while communications to the micro are
down.
Logical Reader
Function
Select the desired Logical Reader Function for this reader:
Normal
Used to grant access into an area.
Anti-Passback In
Anti-Passback Out
Time and Attendance
In/Out
Time and Attendance
In
Time and Attendance
Out
Nested APB
Used to log a badge holder “in” when entering.
Used to log a badge holder “out” when exiting.
Used to log a badge holder “in” and “out” using the same reader (such as
the Model 100 Wiegand reader) by swiping the badge the normal way for
“in” and reversing the badge or turning the badge backwards for “out”.
Used to log a badge holder “in” at the start of a work shift.
Used to log a badge holder “out” at the end of a work shift
Used to configure APB on nested areas.
APB
If the Logical Reader Function is set to APB In, APB Out, or Nested APB, select the desired APB
Type for this reader:
Global APB
Timed APB
Reset Timed APB
Immediately
Timed APB Duration
Used as the default, this allows the host to share APB status/nested APB
area status with participating controllers.
Used to designate the reader as a Timed APB reader in which a badge
holder’s APB status/nested APB area returns to Neutral after a defined
period of time. A Timed APB reader is useful in a site where a badge holder
may enter a site by going through an APB reader but is not required to exit
the site by going through an APB reader. If this option is selected, a Timed
APB Duration must also be defined. A Timed APB status/nested APB area
is local to the micro.
Used to reset the Timed APB status/nested APB area back to Neutral
immediately following a badge swipe.
Enter a value to represent how long a badge holder’s Timed APB status/
nested APB area is set when the badge is used on the reader. The Timed
APB Duration cannot exceed one day. A duration of 0 allows the micro to
reset the status to Neutral immediately, producing the same effect as Reset
Timed APB Immediately.