Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 8
Device management
143
Table 61. Micro communication (continued)
Type of micro
communication
Micro form fields
Primary Port Secondary Port Upstream Downstream Modem Type
Network Dial-up Network Port None If a head of line
micro: Host 1
1. Otherwise, anything except Host
2. Otherwise, anything except Host or None
To change a micro configuration:
1. Select Configuration, Micros, and then Micro tab.
If an end of line
micro: None 2
If a head of line micro,
anything except: None or
Downstream Dial up.
Otherwise: Downstream Dial
up
2. From the toolbar, click Find to retrieve all the micro records or enter specific search
criteria to limit the search and then click Find.
3. Refer to Creating, editing, deleting, and printing records on page 36.
The updated micro is reset automatically if the Configure field is changed to Online. After
the micro resets, it requests its new configuration from the host so that it can operate
according to its new parameters. The host downloads the new micro configuration.
System operations and communications continue normally during a micro reset.