Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 10
Schedules, modes, and events
197
Table 86. Area Event form fields (continued)
Field
Swipe and Show
Control
Description
This feature is only visible if you have the Image package installed. You can schedule a specific time
period for any of the following functions to be active:
Swipe and Show
• Select Enabled to enable Swipe And Show on this reader.
• Select Disabled to disable Swipe And Show on this reader.
Note:
A reader cannot be defined as Toggle when Swipe And Show is Enabled. See Toggle on
page 179. If Toggle is set to Yes and either Authorization Required or Authorization Not
Required is turned on, photos are displayed for invalid transactions, but not valid
transactions.
Authorization
Required
• Yes: Designate a reader that displays a photo on the Activity Monitor and require
an operator to unlock a door.
• No: Designate a reader that displays a photo on the Activity Monitor and unlocks
a door without operator intervention.
• Do Not Care: See Radio buttons on page 27.
Notes:
• The Yes and No buttons are not available unless Swipe And Show Enabled is
selected.
• Access cannot be granted through readers defined as Authorization Required
while communications to the micro are down.
Logical Reader
Type
APB Type
To change the way the reader functions, schedule a reader event that changes the logical reader
function: Normal, Anti-passback In, Anti-passback Out, Time & Attendance In, Time & Attendance
Out, or Time & Attendance In/out.
Do Not Care: See Radio buttons on page 27.
Example: To provide higher security after hours, you can set up certain readers as anti-passback-in
readers and others as anti-passback-out readers;
or
To provide data about shifts that badge in and out of an area, you can set up a reader event that
changes a normal reader to a Time & Attendance In (or Out) reader.
To change the way the anti-passback feature functions, schedule an area event that changes the
APB Type of all readers in the area: Global APB or Timed APB.
Global APB
Timed APB
Reset Timed
APB
Immediately
APB Duration
Used as the default, this allows the host to share APB status/nested APB area status
with participating controllers.
Used to designate the reader as a Timed APB reader in which a badge holder’s APB
status/nested APB area returns to Neutral after a defined period of time. A Timed
APB reader is useful in a site where a badge holder may enter a site by going through
an APB reader but is not required to exit the site by going through an APB reader. If
this option is selected, a Timed APB Duration must also be defined. A Timed APB
status/nested APB area is local to the micro.
Used to reset the Timed APB status/nested APB area back to Neutral immediately
following a badge swipe.
A value that represents how long a badge holder’s Timed APB status (In or Out) is set
when the badge is used on a reader, before being returned to Neutral.