Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 10
Schedules, modes, and events
189
Figure 79.Change Mode form
Fields and controls
Table 83. Change Mode form fields
Field
Current Modes for
Facilities
Select All Facilities
Mode
Permit schedule
mode changes:
Description
This pane reflects the mode that is currently in effect, and the previous mode for each facility. Select
a facility from this pane to rollback or change a mode. See Creating facilities on page 52.
Click this button to select all active facilities.
Click to display the Modes list box. Select the operating mode to which you want to change.
Select Yes or No, to indicate whether you want the system to allow future mode changes to occur as
scheduled. You can change this option even if you don’t change the mode itself.
Yes
No
Select Yes to allow scheduled mode changes to occur.
Select No to override scheduled mode changes in an emergency.
Example: If you change to an emergency mode on the day before a
scheduled holiday and you permit scheduled mode changes to occur, the
system switches to holiday mode as scheduled. If you do not permit
scheduled changes to occur, the system stays in the emergency mode until
you use the Mode Command form to change the mode again.
Email Send Email Select Send Email to send a notification to all email addresses associated
with the selected facilities.
Do Not Send Email
Default Mode Email
Setting
Select if sending an email notification is not necessary.
Select to send an email as defined on the Modes form.
Change Mode
Rollback
Click the Change Mode button to tell the system to change to the selected mode and/or to allow or
disallow scheduled mode changes.
Select the Rollback button to revert back to the previous mode.
Note: Rollback from Emergency mode is not allowed.