Picture Perfect 4.6 User Manual - UTCFS Global Security Products

330
Picture Perfect 4.6
User Manual
Overview
Your access control system is a group of devices working together, including a host, micros, readers,
doors, inputs, and outputs. To accommodate high security areas, elevators, and varying stages of
security alerts, these devices can be configured to operate in different manners, based on your
particular needs.
Occupancy control
Picture Perfect allows the number of persons in a controlled space to be monitored by enabling
Occupancy Control through the Areas form. This option is used when the number of people in an
area must be controlled, such as fire code enforcement regulations or when Two Man Rule is
enforced. The occupancy count is set to zero and Picture Perfect updates the occupancy count when
a valid entry or exit to/from the area occurs.
Note:
Areas with Occupancy Counting enabled cannot span micros. All readers and doors must be physically connected
to the same micro.
How to set up occupancy control
You need to complete the following forms to set up occupancy control for an area:
• Reader form: To configure the area readers.
• Door form: To configure the doors in the area.
• Facility Profile form: To enable Occupancy Control.
• Area form: To enable Occupancy Counting for the area.
To set up the area readers:
1. From the Configuration menu, select Doors and Readers, and then click the Readers tab.
2. From the toolbar, click Find to locate the reader record you want to set up.
3. On the Function tab, under Logical Reader Function, enable the appropriate radio button:
APB In, APB Out, T&A In, or T&A Out.
Note:
In an area with Occupancy Control enabled:
• All readers in the area must be assigned one of these logical functions: APB In, APB Out, T&A In, or
T&A Out.
• APB readers must be set to Global. Timed APB is not allowed.
• The logical reader function T&A In/Out is not allowed for any reader.