Picture Perfect 4.6 User Manual - UTCFS Global Security Products

260
Picture Perfect 4.6
User Manual
responses selected from the Responses list box exceed this limit, a warning displays and the
response is truncated to the maximum length. The response may then be edited in the Enter
New Response: box to make the truncated response more presentable.
6. Log the response.
• To log the response without clearing the alarm, click OK. You can continue to select this
alarm again to enter new responses. The previous responses appear in the Responses
To Date box.
• To log the response and clear the alarm, click Remove on the Alarm Response window.
See Related procedures on page 255.
7. Optional: Click the close button (X button) to close the window without altering the state of the
alarm.
Monitoring badge activity
The Badge Monitor displays the following types of badge activities:
Table 107.Badge activities - Valid
Valid transactions
APB In
APB Out
Degraded Open
Open
Open Duress
Open Shunt
Passive APB In
Passive APB Out
Swipe And Show
T&A In
T&A Out
Valid Door Locked
Valid Floor
Valid No Passage
Valid Toggle
Valid Nested APB
A valid read occurred in an Antipassback In reader.
A valid read occurred in an Antipassback Out reader
A read occurred when an 8RP board was offline from the Micro/4 CPU.
A valid read occurred in a Normal reader or a Keypad reader and the door was opened.
A valid read occurred in a Keypad reader but was followed by a duress code. The door was
opened.
The door was opened as part of an alarm shunting process.
A badge holder was granted access in two successive APB IN readers.
A badge holder was granted access in two successive APB OUT readers.
A valid read occurred on a reader configured for Swipe and Show. This is followed by
another valid transaction, indicating how the transaction ended.
A valid read occurred in a Time & Attendance In reader.
A valid read occurred in a Time & Attendance Out reader.
In a double-badge reader, the first badge read was valid but does not open the door until the
second is validated.
A valid floor number was selected with elevator reader/DI/DO configuration.
A valid read occurred but the door was not opened.
A valid read occurred in a Toggle reader which reversed the current state of the Input
Group.
A valid read occurred at a nested APB reader.