Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 3
Configuration checklist
33
Table 23. Checklist for configuring a Picture Perfect system (continued)
# Task Menu Reference
34 Create reader records to define how each reader
operates and to associate it with any links required to
process reader activity.
35 Create door records to define how each door
operates and to associate any links required to
process door status or alarm activity.
36 Create records to define operating modes, in
addition to the system defined Normal mode, that are
activated either by schedule or by command.
37 Create mode event records to assign the starting
date and time that a mode goes into effect when
scheduling a mode change, such as a holiday.
38 Create area events records to define and schedule
the desired characteristics for all the readers, doors,
and routings in an area for the duration of the event.
39 Create reader events records to define and schedule
the desired characteristics of a single reader for the
duration of the event.
40 Create door events records to define and schedule
the desired characteristics of a single door for the
duration of the event.
41 Create alarm events records to define and schedule
the desired characteristics of a single alarm for the
duration of the event.
42 Create input group event records to schedule placing
an input group online or offline and to control the
output groups or alarms that are triggered for the
duration of the event.
43 Create output group event records to schedule
enabling or disabling a specific output group and/or
to change its state to off or on for the duration of the
event.
44 Create backup event records to schedule a system
backup to run automatically at the specified day and
time.
45 Create report event records to schedule SQL reports
to run at specific times.
Configuration >
Doors and Readers >
Readers Tab
Configuration >
Doors and Readers >
Doors Tab
Control >
Modes >
Modes Tab
Control >
Modes >
Mode Events Tab
Access >
Places >
Area Events
Configuration >
Doors and Readers >
Reader Event Tab
Configuration >
Doors and Readers >
Door Events Tab
Configuration >
Alarms >
Alarm Events Tab
Configuration >
Inputs Outputs >
Input Group Events Tab
Configuration >
Inputs Outputs >
Output Group Events Tab
Control >
Backup >
Backup Events Tab
Reports >
Reports Events >
Report Events Tab
See Defining readers on
page 175.
See Defining doors on
page 180.
See Creating modes on
page 186.
See Changing modes by
scheduling a mode event on
page 191.
See Scheduling area events
on page 194.
See Scheduling reader
events on page 198.
See Scheduling door events
on page 201.
See Scheduling alarm
events on page 204.
See Scheduling input group
events on page 206.
See Scheduling output
group events on page 208.
See Scheduling backup
events on page 210.
See Scheduling reports on
page 296.