Picture Perfect 4.6 User Manual - UTCFS Global Security Products

Chapter 8
Device management
163
Figure 72.Time Zone form.
Fields and controls
Table 75. Time Zone form fields
Field
Description
Location ID
Locale
Region
City List
Std. Bias (+/-
HHMM)
Enable DST
DST Bias (+/-
HHMM)
Facility
Description
Enter a description (up to 60 characters). This description should include the name of the country and
region as well as the GMT time offset. Example: US-TX-United States-Texas-{GMT-6.00}
The location code based on the ISO 3166-1 standard (up to 10 characters). Example: US-TX
The name of the country (up to 60 characters). Example: United States
The name of the region if there is more than one time zone (up to 60 characters). Example: Texas
A list of some major cities in this specific region or country (up to 255 characters).Example: Austin,
Dallas, Houston, San Antonio
The normal difference in hours and minutes of time in this location from UTC. UTC (Coordinated
Universal Time) is more commonly referred to as GMT (Greenwich Mean Time) and is the basis for the
worldwide system of civil time.
Click Yes to enable Daylight Savings Time.
Click No to disable Daylight Savings Time.
The normal difference in hours and minutes of time in this location from UTC. UTC (Coordinated
Universal Time) is more commonly referred to as GMT (Greenwich Mean Time) and is the basis for the
worldwide system of civil time.
Click Facility to display the facilities list box. This field reflects the facility to which this record is assigned.
For more information, see Creating facilities on page 52.