Picture Perfect 4.6 User Manual - UTCFS Global Security Products

42
Picture Perfect 4.6
User Manual
Fields and controls
The following is a list of fields that may require additional information for you to complete. Because
forms are user customizable, some of these fields may not appear, or may appear in a different order
than that shown in the following table. There is no required sequence to follow.
Table 24. Parameter form fields
Tab Field Description
Parameters Node Name Node name of the host (normally set to NODE 1). This
field is pre-set and should only be changed as directed
by your customer support representative.
Xon Threshold
Xoff Threshold
Shared Memory Size
Diagnostic Buffer Size
Alarm Monitors
Diagnostic Monitors
Event Monitors
Date Format
Schedule Updates Database
The number of queued messages that control TPS
message buffering. Xon must be smaller than Xoff. This
field is pre-set and should only be changed as directed
by your customer support representative.
The number of queued messages that control TPS
message buffering. Xoff must be larger than Xon. This
field is pre-set and should only be changed as directed
by your customer support representative.
The size (KBytes) of shared memory used. This field is
pre-set and should only be changed as directed by your
customer support representative.
The size (KBytes) of the diagnostic buffer. This field is
pre-set and should only be changed as directed by your
customer support representative.
This field is reserved for future use. Default is 2 for the
current version.
This field is reserved for future use. Default is 1 for the
current version.
This field is reserved for future use. Default is 2 for the
current version.
Specify the date format of Month (MM), Day (DD), and
Year (YY or YYYY) that the system uses. Click a radio
button to select one system date format.
When a micro runs a schedule, a SUP (Schedule
Update) message is sent to the host. This SUP
message gets logged in the /cas/log/sup.mmdd log
file where mm is the current month and dd the day. If this
value is set to Yes, the database is updated to reflect
the value changed by the schedule.