User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE4.24.2 Timer Modes (Cont.)MIN ONThis ‘Off delay’ function provides an output signal that goes ‘on’ when the trigger goes active and remainson for a specified period after the trigger goes inactive.If the trigger goes inactive, then active again before the time period has elapsed, then the elapsed time isreset to zero and the output remains on.The ‘Triggered’ parameter is on whenever the elapsed time is counting down.TriggerTime Time TimeOutputElapsed timeTriggeredFigure 4.24.2d ‘Min On’ timer definitions4.25 USER VALUESThis ‘Toolkit’ option block allows up to 12 values to be configured for use as inputs to other parameters.User Value.1UnitsResolutionHigh LimitLow LimitValueStatus2100000000.00-100000000.000.00OkFigure 4.25 User value configuration4.25.1 ParametersUnitsAllows a five-character string to be entered for the user value unitsResolution The number of decimal places for the user value (max. = 6)High/Low Limit Sets maximum and minimum values that the User value can be set toValueThe user value, either entered manually, or wired to another appropriate parameterStatusThe output status for the User Value.HA030554Issue 7 Nov 12Page 167