User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE4.1.1 ClockThe up and down arrows are used to highlight ‘Date’ (default) or ‘Time’.To set the date, the scroll button is used to display the numeric keyboard described in Section 3.6.1. The upand down arrows are used to highlight the relevant numeral or separator (‘/’ or ‘:’) and the scroll key used toenter it into the display window.To set the time, the scroll button is operated to enter edit mode, then the up and down buttons are used toscroll to display a time, say 15 seconds later than the current time. Once the current time matches the display,the scroll button is pressed to confirm the time and to start the clock.Instrument.ClockDateTimeDSTFigure 4.1.1 Clock menuThe ‘DST’ field appears only If ‘DST Enable’ is selected ‘Yes’, in ‘Locale’ (Section 4.1.2). If the ‘box’ containsa cross (as shown) then Daylight Saving Time (DST) is not currently active. A ‘tick’ means that the time shownhas been advanced by an hour because DST is active.Page 58HA030554Issue 7 Nov 12