User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE4.2.2 Archiving (Cont.)On Media Full For ‘Destination’ = ‘USB’ only, this allows the user to select ‘Overwrite’ or ‘Stop’ as theaction to be taken when the memory stick is full. ‘Overwrite’ causes the oldest data tobe discarded from the memory stick to make room for newer data. ‘Stop’ inhibits archivingactivity.Remote Path Left blank if the archive destination is the home folder. If the destination is to a subfolderwithin the home folder, then the name of the subfolder is entered here, preceded by a‘/’ character (e.g. ‘/history’).Primary Server Allows the user to enter the IP address for the pc to be used as the primary FTP server.Primary User/PasswordThese are the Login name and password of the remote host account, assigned eitherby the Network administrator, or set up in the ‘Guest’ account of the remote host’s ‘FTPserver’ or ‘User Manager’ configuration.Sec. Server/user/passwordAs Primary server details above, but for the secondary FTP server used when the primaryis not available for any reason.TriggerThis parameter can be ‘wired’ to, say, an alarm going active, or a digital input, to allowan archive to be triggered remotely. Can also be set to ‘yes’ manually.PeriodAppears only if ‘Trigger’ is wired (Section 7). Allows a period of history to be selectedfor archiving when ‘Trigger’ goes ‘true. Selections are: None, Last Hour, Last Day, LastWeek, Last Month, All, Bring to Date. (‘Last Month’ archives the last 31 days of history.)Click/drag separatorto edit field widthInclude headerdetailsInclude columnheadingsInclude valuesRight click, then:Format cells...select ‘time’ as number categorySelect time/date ‘type’ as required.Include messagesFigure 4.2.2b CSV data example4.2.3 FTP ServerThis area of configuration allows the user to enter the Username and Password used to access the instrumentfrom a remote FTP client.HA030554Issue 7 Nov 12Page 75