User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE7.2 Counter Example (Cont.)8. Operate the Scroll key to highlight ‘Add new wire’, then again to display the top level parameter list.9. Use the down arrow button to highlight ‘Channel’ and operate the scroll button.10. Operate the scroll button to select ‘1’.11. Highlight ‘Alarm 1’ and operate the scroll button.12. Use the down arrow button to highlight ‘Active’. Operate the Scroll button again, and create the newwire.13. Use the Page button twice to return to the Virtual Channel 3 menu.User WiringVirtual Channel.3.Main.TriggerTo Destination From SourceAdd new wireUser WiringVirtual Channel.3.Main.TriggerChannel1MainTrendAlarm12Alarm2User WiringVirtual Channel.3.Main.TriggerInstrumentNetworkGroupChannelVirtual ChannelLoopDigital I/OUser WiringVirtual Channel.3.Main.TriggerAlarm1TypeStatusThresholdDwellAcknowledgeActiveUser WiringVirtual Channel.3.Main.TriggerInstrumentNetworkGroupChannel123Create New Wire?Cancel OkUser WiringVirtual Channel.3.Main.TriggerTo Destination From SourceAdd new wireChannel.1.Alarm1.AcktiveFigure 7.2b Wiring a counter: part 2Page 290HA030554Issue 7 Nov 12