User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE6.6.4 Adding and deleting segments.INSERT SEGMENTAs shown in figure 6.6.4, to insert a segment, click in the segment number field of the segment to the rightof where the new segment is to be located. This causes the whole segment to highlight. Click on the bluedown arrow tool icon to insert the new segment. The new segment name is the segment number, and thesegment configuration is that of the segment to the right, unless that segment is a Goback or End segment,in which case the new segment is a ramp segment.To insert more than one segment, operate the shift key whilst clicking on the range of contiguous segmentsto be copied.Figure 6.6.4 Insert a segmentAlternatively the mouse can be right-clicked anywhere in a segment, and the ‘Insert segment’ item selected,or one or more segment can be highlighted and the ‘Insert’ key on the pc keyboard used to initiate the process.See section 6.6.7 for more details of the right-click (context) menu.CUTTING, COPYING AND PASTING SEGMENTSThe process of highlighting one or more segments causes the cut and copy toolbar icons to become active.The cut tool removes the highlighted segments from the program and stores them on the pasteboard readyfor re-use.The copy tool copies the selected segment(s) to the paste board, leaving the original segment(s) in place.Once one or more segments have been cut or copied, the ‘Paste insert’ and ‘Paste over’ icons become activeallowing the user to paste the contents of the pasteboard in front of a selected segment (Paste insert), or tooverwrite the existing highlighted segment(s) (Paste over). When using the Paste over tool, the number ofsegments being pasted over must match the number of segments on the paste board.DELETING SEGMENTSOnce one or more segments have been highlighted, the highlighted segments can be removed using theDelete toolbar icon, by using the Delete Segment item in the right-click (context) menu, or by operating thepc keyboard ‘Ctrl’ and Delete’ keys simultaneously.HA030554Issue 7 Nov 12Page 279