User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE4.1.2 LocaleInstrument.LocaleLanguageDate FormatTime ZoneDST EnableStart TimeStart OnStart DayStart MonthEnd TimeEnd OnEnd dayEnd MonthEnglishDD/MM/YYGMTYes01:00LastSundayMarch02:00LastSundayOctoberFigure 4.1.2 Typical Instrument configuration menu (expanded to show all fields)LanguageDate formatTime ZoneDST EnableStart TimeStart OnStart DayStart MonthSelect the language to be used for displays etc.Select MM/DD/YY, YY/MM/DD as the required format.Select the required offset from GMT (UTC). This setting affects only the displayed time.Archiving, recording etc. times remain in GMT.Daylight Saving Time enable. Once the selection is enabled, the following (previouslyhidden) fields appear, allowing the start and end dates for Daylight Saving Time (DST)to be configured. DST affects only the displayed time. Archiving, recording etc. timesremain in GMT.Appears only when ‘DST Enable’ (above) is set to ‘Yes’. Use the up/down keys to scrollto the required start time.Select ‘Last’, ‘First’, ‘Second’, ‘Third’ or ‘Fourth’ as the required week. Used in conjunctionwith the ‘Start Day’ and ‘Start Month’ entries following.Select the day of the week on which DST is to commence.Select the month in which DST is to commence.End Time, End On, End Day, End MonthAs for ‘Start Time’ etc. above, but specifies the end time and date for daylight savings.HA030554Issue 7 Nov 12Page 59