User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE6.4 Parameter Explorer (Cont.)Explorer menuContext menuFigure 6.4b Column enable/disable6.4.1 Parameter explorer detailFigure 6.4.1a shows a typical parameter table. This particular parameter has a number of subfolders associatedwith it, and each of these is represented by a ‘tab’ across the top of the table.Figure 6.4.1a Typical parameter tableNotes:1. Parameters in blue are non-editable (Read only). In the example above all the parameters areread only. Read/write parameters are in black and have a ‘pencil’ symbol in the ‘read/Write accesscolumn at the left edge of the table. A number of such items are shown in figure 6.4.1a, above.2. Columns. The default explorer window (figure 6.4a) contains the columns ‘Name’, ‘Description’,‘Address’, ‘Value’, and ‘Wired From’. As can be seen from figure 6.4b, the columns to be displayedcan be selected, to a certain extent, using either the ‘Explorer’ menu or the context menu.3. Hidden Parameters. By default, iTools hides parameters which are considered irrelevant in thecurrent context. Such hidden parameters can be shown in the table using the ‘Parameter availability’settings item of the options menu (figure 6.4.1b). Such items are displayed with a shadedbackground.4. The full pathname for the displayed parameter list is shown at the bottom left hand corner of thewindow.Page 272HA030554Issue 7 Nov 12