User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDEC2.2 SERVER SETUP1. Create a new folder (directory) called, for this example, ‘Archive’in a suitable location such as the C drive, or the desktop.2. In the Filezilla server window, click on ‘File’ and select ‘Connect toServer’.The ‘Logged on’ message appears3 In the Edit menu, select ‘Users’ and in the ‘General’page, click on ‘Add’ and enter a name for the user,then click ‘OK’. For this example, ‘GeneralUser’ hasbeen used, but it may be more advantageous touse ‘Anonymous’ because this is the default namein the recorder/controller. Click on ‘OK’.4 In the Edit menu, select ‘Users’ and in the ‘SharedFolders’ page, click on ‘Add’A browse window opens allowing the user toselect the new folder (‘Archive’) created in step 1,above.When OK has been clicked to confirm the selection,the new folder appears in the centre window(with an ‘h’ next to it to indicate that this is thehome folder for this ftp user setup.5. Click on the relevant folder to enable the tickboxes. Click on all the ‘File’ and ‘Directory’ enabletick boxes, then click OKAppendix CPage 330HA030554Issue 7 Nov 12