User Guide - Eurotherm Ltda

nanodac RECORDER/CONTROLLER: USER GUIDE6 iTOOLSiTools software running on a pc allows quick and easy access to the configuration of the unit. The parametersused are generally the same as those described in section 4 above, with the addition of various diagnosticparameters.iTools also gives the user the ability to create software wiring between function blocks, such wiring beingcarried out using the Graphical wiring Editor feature.A further feature - the display mode ‘Promote List’, is populated using iTools - see section 3.4.11 for details.In addition to the guidance given here, there are two on-line Help systems available within iTools: Parameterhelp and iTools help. Parameter help is accessed by clicking on ‘Help’ in the toolbar (opens the completeparameter help system), by right-clicking on a parameter and selecting ‘Parameter Help’ from the resultingcontext menu, or by clicking on the Help menu and selecting ‘Device Help’. iTools help is accessed by clickingon the Help menu, and selecting ‘Contents’. iTools help is also available in manual format under partnumber HA028838, either as a physical manual or as a pdf file.Figure 6 Help accessHA030554Issue 7 Nov 12Page 257