Frequency Inverter DF51... - Moeller.com.tr

Setting parameters04/07 AWB8230-1541GBAnalog output (AM)LAMU10 Vb080 = 200 %b080 = 100 %0 – 10 V1 mA–+Figure 107:Analog output AM5 Vb080 = 50 %The AM terminal provides the output frequency or the motorcurrent as voltage signal (0 to +10 V). The reference potential is0 V (terminal L).The selection between the frequency and motor current indicationis made with PNU C028.Analog output signalFor signal <strong>com</strong>pensation, PNU b080 (gain) and PNU C086 (offset)are used. The signal accuracy after <strong>com</strong>pensation is about g5 %.0 50 % 100 %C086Figure 108: Analog output signalHzAPNU Designation RUN b031= 10Value Function DSb080b086C028C086Analog outputAM, gain factor<strong>Frequency</strong>indicationscaling factorfor value inPNU d007Analog outputAM, measuredvalueindicationselectionAnalog outputAM – offset<strong>com</strong>pensationj j 0…255 Here the analog 0…10 V signal output at the AM terminal can be<strong>com</strong>pensated and matched to the frequency actual value or the outputcurrent.j j 0.1…99.9 The product of the value displayed under PNU d001 and this factor isdisplayed at PNU d007. This value is also available at the AM terminal.– – 00 f-Out: Current output frequency: Indicates the output frequency in therange 0 to f max (PNU A004).01 I-Out: Current output current: Indicates the motor current in the range0 to 200 %.j j 0…10 V Offset <strong>com</strong>pensation for analog output signal AM. 0.01001.000106