Frequency Inverter DF51... - Moeller.com.tr

Appendix04/07 AWB8230-1541GBOperating software DrivesSoft2The DrivesSoft2 operating software allows a quick configuration,operation, diagnosis and documentation of a DF or DV frequencyinverter.DrivesSoft2 is contained on the DriveCenter CD, which is suppliedwith each frequency inverter.InstallationThe DrivesSoft2 installation routine can be run in English or inGerman. The language selected for installation has no effect onthe program interface language. The default program languagecan be selected in a separate step during installation. The selectedprogram language can be changed at any time with menu itemDatei, Optionen.I OHzARUNPRGPRG ENTERPOWERALARMThe operating software DrivesSoft2 allows only a point-to-pointconnection between PC and frequency inverter. The connection isestablished through the optional interface converter DEX-CBL-2M0-PC. This consists of a converter (RS232/RJ45) with a 2 m longconnecting cable and an RJ45 and a 9-pin Sub-D plug. If you havea PC with USB port, you can expand the interface converter DEX-CBL-2M0-PC with a <strong>com</strong>mercial USB-RS232 converter. To preventdata transfer faults with the USB connection, select a converterwith potential isolation.Figure 197:Configuration, operation, diagnosis anddocumentation of the frequency inverter withDrivesSofthSome programs permanently block the serial interfaceand therefore can prevent <strong>com</strong>munications with thefrequency inverter. These include Palm-Hot-Sync, ActiveSync and the Nokia Communication Manager.Selecting a frequency inverterX Start the program with a double-click on the “DrivesSoft2”icon.hOnce the frequency inverter is connected to the PC, thebuilt-in keypad is disabled. nly the STOP button and the 4-digit digital display remain active.i Warning!Interrupting the connection between PC and frequencyinverter during online operation can result in anuncontrolled operating state of the drive. Make sure thatthe power supply to the frequency inverter can always beswitched off (for example with a mains contactor oremergency-stop circuit) and that the motor can bestopped at any time (for example with a mechanicalbrake).hTo view the version of the installed DrivesSoft2 software,select menu item ‹Hilfe l Info›. Current versions of thesoftware are available on the Internet underftp://ftp.moeller.net/DRIVES/SOFTWARE.X In the DrivesSoft2 - Unbekannt menu select Frequenzumrichterhinzu to open the device selection, a figure 198.212