Frequency Inverter DF51... - Moeller.com.tr

Setting parameters04/07 AWB8230-1541GBPNU Designation RUN b031= 10Value Function DSC141C142C143Logic function– select input ALogic function– select input BLogic function– select link[LOG]– – 00 RUN: In operation 0001 FA1: <strong>Frequency</strong> reference value reached02 FA2: <strong>Frequency</strong> signal – output frequency exceeds value in PNU C042(during acceleration ramp) or PNU C043 (during deceleration ramp).03 OL: Overload warning – motor current exceeds value in PNU C041.04 OD, PID control: Reference/actual value difference exceeds signallingthreshold set with PNU C044.05 AL: Fault – fault/alarm signal06 Dc: Warning – reference value at input O (0 to +10 V) lower than valuein PNU b082 or current signal at input OI below 4 mA.07 FBV: PID control – actual value monitoring (PV) signal on breach of limitvalues PNU C052/C053.08 NDc: Fault/warning dependent on PNU C077 – <strong>com</strong>municationwatchdog timer has expired: <strong>com</strong>munications are faulty.10 ODc: Fault/warning: Communication overload or interrupted (withoptional DE51-NET-CAN, DE51-NET-DP).– – 00 RUN: In operation 0101 FA1: <strong>Frequency</strong> reference value reached02 FA2: <strong>Frequency</strong> signal – output frequency exceeds value in PNU C042(during acceleration ramp) or PNU C043 (during deceleration ramp).03 OL: Overload warning – motor current exceeds value in PNU C041.04 OD, PID control: Reference/actual value difference exceeds signallingthreshold set with PNU C044.05 AL: Fault – fault/alarm signal06 Dc: Warning – reference value at input O (0 to +10 V) lower than valuein PNU b082 or current signal at input OI below 4 mA.07 FBV: PID control – actual value monitoring (PV) signal on breach of limitvalues PNU C052/C053.08 NDc: Fault/warning dependent on PNU C077 – <strong>com</strong>municationwatchdog timer has expired: <strong>com</strong>munications are faulty.10 ODc: Fault/warning: Communication overload or interrupted (withoptional DE51-NET-CAN, DE51-NET-DP).– – 00 [LOG] = A AND B, AND sequence 0001 [LOG] = A OR B, OR sequence02 [LOG] = A XOR B, Exclusive OR sequence126