Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Holding register (wordvariable)HoldingregisterFunctioncodeDesignationAccessrightsValue rangeManipulatedvariablehex106E A077 PID controller – invert inputsignals106F A078 PID controller – outputsignal limit1070 A081 Output voltage (AVRfunction)1071 A082 Output voltage (AVR motorrated voltage)rw 00: Off: Disabled, reference value (+), actualvalue (–)01: On: Enabled, reference value (–), actualvalue (+)rw 0…100 % 0.1 [%]rw 00: On: Enabled –01: Off: Disabled02: DOFF: Disabled during decelerationrw DF51-32…-…: 200, 215, 220, 230, 240 –DF51-340-…: 380, 400, 415, 440, 460, 480Default setting depends on series1072 A085 Reserved rw – –1073 A086 Reserved rw – –1074 A092 Acceleration time 2 (MSB) rw 0.01…3000 s 0.01 [s]1075 A092 Acceleration time 2 (LSB) rw 0.01…3000 s1076 A093 Deceleration time 2 (MSB) rw 0.01…3000 s 0.01 [s]1077 A093 Deceleration time 2 (LSB) rw 0.01…3000 s1078 A094 Acceleration time, specifysignal for changeover fromacceleration time 1 toacceleration time 2rw 00: Digital input (2CH) –01: <strong>Frequency</strong> (PNU A095 or A096)1079 A095 Reserved rw – –107 A A095 Acceleration time, frequencyfor changeover from ramptime 1 to ramp time 2rw 0.0…400 Hz 0.1 [Hz]107B A096 Reserved rw – –107C A096 Deceleration time,frequency for changeoverfrom ramp time 1 to ramptime 2107D A097 Acceleration time,characteristic107E A098 Deceleration time,characteristicrw 0.0…400 Hz 0.1 [Hz]rw 00: Linear –01: S curverw 00: Linear –01: S curve107F A101 Reserved rw – –1080 A101 Analog input (OI-L),frequency at minimumreference valuerw 0…400 Hz 0.1 [Hz]1081 A102 Reserved rw – –1082 A102 Analog input (OI-L),frequency at maximumreference value1083 A103 Analog input (OI-L),minimum reference value(offset)rw 0…400 Hz 0.1 [Hz]rw 0…100 % 1 [%]–165