Frequency Inverter DF51... - Moeller.com.tr

Setting parameters04/07 AWB8230-1541GBDebug mode (PNU C091)h Attention!The parameters and information listed in this section areintended only for specially trained personnel. Anychanges to the parameters listed here can causeunpredictable operating states.hDuring operation, PNU C091 must always contain thevalue 00.With PNU C091 = 01 the parameters listed in the table below aredisplayed.PNU Designation RUN b031= 10Display and value rangeManipulatedvariableRemarkC091 Debug mode j j 00: Disabled (do not show parameter) 0001: Enabled (display parameter)C092 Indication, DC linkvoltagej j 0000 - FFFF(do not change)– 1200C093C094C095Indication, debugmodeIndication, debugmode (bit)Selected debugmodej j 0000 - FFFF(do not change)j j Address range 0000 – FFFF h 0 – 7 bit selected(do not change)j j 00: Internal01: IO range– 1200– 1200– 00C121 O <strong>com</strong>pensation – – 0 - 65535 1. Default settingC122 OI <strong>com</strong>pensation – – 0 - 65535 1. Default settingC123 OI zero– – 0 - 65535 1./10. Default setting<strong>com</strong>pensationC190 Test safety mode – – 00: OFF– –01: ONC193 Test flag – – 0 - 65535 – –C194 Test flag mode – – 00: Standard– –01: Test routine mode02: Function routine modeC195 Initialization,country-coding– – 00: Japan01: Europe02: USAC196C197Assigned motorratingVoltage class,coding– – 200 V class• Japan, USA: 0.2; 0.4; 0.75; 1.5; 2.2; 3.7; 5.5; 7.5 [HP]• Europe: 0.2; 0.4; 0.55; 0.75; 1.1; 1.5; 2.2; 3.0; 4.0; 5.5; 7.5 [kW]400 V class• Japan: 0.2; 0.4; 0.75; 1.5; 2.2; 3.7; 5.5; 7.5 [HP]• USA: 0.2; 0.4; 0.75; 1.1; 1.5; 2.2; 3.7; 4.0; 5.5; 7.5 [HP]• Europe: 0.2; 0.4; 0.55; 0.75; 1.1; 1.5; 2.2; 3.0; 4.0; 5.5; 7.5 [kW]– – • 00: 200 V class• 01: 400 V class– Default settingd101 Indication – scaled output frequency 0.0 – 400.0 0.1 [Hz] –d102 Indication, DC link voltage 0.0 – 999.9 (DC+/DC–) 0.1 [V] –d104 Indication, thermal load on0.0 – 100.0 0.1 [%] –electronicsd106 Indication, MCU number 0000 – 9999 1 –d107 Indication, IO MCU number 0000 – 9999 1 -d109 Indication, maximum DC link voltage 0.0 – 999.9 0.1 [V]Default setting142