Frequency Inverter DF51... - Moeller.com.tr

Setting parameters04/07 AWB8230-1541GBAcceleration and deceleration timeF-COMfF001F002F003FWD0tREVSTARTSTOPFWD/REVF004Figure 76:Acceleration/deceleration rampsAcceleration time 1Acceleration time 1 defines the time in which the frequencyinverter reaches its end frequency after a start signal is issued.PNU Designation RUN b031= 10Value Function DSF002F202Accelerationtime 1j j 0.01 … 3000 s Resolution of 0.01 s at an input of 0.01 to 99.99Resolution of 0.1 s at an input of 0.1 to 999.9Resolution of 1 s at an input of 1000 to 300010.00Deceleration time 1Deceleration time 1 defines the time in which the frequencyinverter reduces the output frequency from the end frequency to0 Hz after a stop signal.PNU Designation RUN b031= 10Value Function DSF003F203Decelerationtime 1j j 0.01…3600 s Resolution of 0.01 s at an input of 0.01 to 99.99Resolution of 0.1 s at an input of 100.0 to 999.9Resolution of 1 s at 1000 to 3600 s10.00hDeceleration times that are set too low cause an increasedDC link voltage (regenerative braking) and can cause ashutdown with fault message E07.Direction of rotationThe direction of rotation defines the direction in which the motorturns after a start signal is issued.PNU Designation RUN b31 = 10 Function DSF004 Direction of rotation –function of Start key (keypad)j j 00: Clockwise rotating field (FWD) 0001: Anticlockwise rotating field (REV)74