Frequency Inverter DF51... - Moeller.com.tr

Setting parameters04/07 AWB8230-1541GBConfigurable digital outputs 11 and 12 are by default configuredas N/O contacts. When an assigned function activates the output,terminal CM2 is connected with terminal 11 or 12.Optionally, you can configure the digital outputs as break (NC)contacts. To do this, enter 01 under PNU C031 and C032(corresponding to digital output 11 and 12).Response time of outputsYou can set the response time of digital outputs 11 and 12between 0 and 100 s. The On- and off-delay can be adjustedseparately.Example:Table 32:PNUConfiguration of digital outputs as break contactsTerminalValueC031 11 00 orC032 1201Adjustable inRUN modeFunction– 00: Makecontact01: BreakcontactDS00abcdt 2t 2 t 1t 1t 2t 1fetFigure 111: Output signala Output signal without delayb Output signal with on-delayc Output signal with off-delayd Output signal with on- and off-delaye When the output signal is lower than the On-delay, the output isnot activated.f The off-delay is activated regardless of the signal duration.t 1 : On-delayt 2 : Off-delayPNU Designation RUN b031= 10Value Function DSC144C145C146C147Digitaloutput 11 –decelerationtime (On)Digitaloutput 11 –decelerationtime (Off)Digitaloutput 12 –decelerationtime (On)Digitaloutput 12 –decelerationtime (Off)– j 0…100 s Delay on energization 0.0– j 0…100 s Delay on power off 0.0– j 0…100 s Delay on energization 0.0– j 0…100 s Delay on power off 0.0108