Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Holding register (wordvariable)HoldingregisterFunctioncodeDesignationAccessrightsValue rangeManipulatedvariablehex109B – Reserved rw – –…10A410A5 b001 POWER, restarting modeafter power supplyinterruption10A6 b002 POWER, permissible powersupply downtime10A7 b003 POWER, waiting time beforeautomatic restart afterpower supply failure10A8 b004 POWER, fault signal onintermittent supply voltagefailure or undervoltage10A9 b005 POWER, number ofautomatic restartingattempts after intermittentsupply voltage failure orundervoltagerw 00: Fault signal E 09, automatic restart at 0 Hz –01: Automatic restart at set starting frequencyafter expiry of time set with PNU b003.02: After the time set with PNU b003 haselapsed, the frequency inverter synchronizesto the current motor rotation speed and themotor is accelerated to the reference currentin the set ramp times.03: After the time set under PNU b003 haselapsed, the inverter synchronizes to thecurrent motor rotation speed and the motorbrakes to a stop in the set deceleration time.A fault message is then displayed.rw 0.3…25 s 0.1 [s]rw 0.3…100 s 0.1 [s]rw 00: Off: Disabled –01: On: Enabledrw 00: 16 restarts –01: No limit10AA b006 Reserved rw – –10AB b007 Reserved rw – –10AC – Reserved rw – –10AD b012 Thermal overload, trippingcurrent10AE b013 Thermal overload,characteristic (torque curve)rw0.2…1.2 x I e [A]Depending on frequency inverter’s rated current (I e )rw 00: Reduced torque 1 –01: Constant torque02: Reduced torque 210AF b015 Reserved rw – –10B0 b016 Reserved rw – –10B1 b017 Reserved rw – –10B2 b018 Reserved rw – –10B3 b019 Reserved rw – –10B4 b020 Reserved rw – –10B5 b021 Motor current limitation –functionrw 00: Off: Disabled –01: On: Enabled in acceleration phase and atconstant speed02: Enabled only at constant speed0,01 [%]167