Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Holding register (wordvariable)HoldingregisterFunctioncodeDesignationAccessrightsValue rangeManipulatedvariablehex114 A C102 Reset function (RST) –response to a Reset signalrw 00: On a rising edge the fault signal is reset andthe motor is stopped.01: On a falling edge the fault signal is reset andthe motor is stopped.02: On a rising edge the fault message is reset.114B C103 Reserved rw – –114C C111 Reserved rw – –114D C121 Reserved rw – –114E C122 Reserved rw – –114F C123 Reserved rw – –1150 C141 Logic function – select inputA1151 C142 Logic function – select inputB1152 C143 Logic function – select link[LOG]1153 C144 Digital output 11 –deceleration time (On)1154 C145 Digital output 11 –deceleration time (Off)1155 C146 Digital output 12 –deceleration time (On)rw 00: RUN: In operation –01: FA1: <strong>Frequency</strong> reference value reached02: FA2: <strong>Frequency</strong> signal – output frequencyexceeds value in PNU C042 (duringacceleration ramp) or PNU C043 (duringdeceleration ramp).03: OL: Overload warning – motor currentexceeds value in PNU C041.04: OD, PID control: Reference/actual valuedifference exceeds signalling threshold setwith PNU C044.05: AL: Fault – fault/alarm signal06: Dc: Warning – reference value at input O(0 to +10 V) lower than value in PNU b082or current signal at input OI below 4 mA.07: FBV: PID control – actual value monitoring(PV) signal on breach of limit valuesPNU C052/C053.08: NDc: Fault/warning dependent onPNU C077 – <strong>com</strong>munication watchdogtimer has expired: <strong>com</strong>munications arefaulty.10: ODc: Fault/warning: Communicationoverload or interrupted (with optionalDE51-NET-CAN, DE51-NET-DP).rw Values a PNU C141 –rw 00: [LOG] = A AND B –01: [LOG] = A OR B02: [LOG] = A XOR Brw 0…100 s 0.1 [s]rw 0…100 s 0.1 [s]rw 0…100 s 0.1 [s]–175