Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Actual value and status signalsParameterizable digital outputsFigure 109:K12 K14 K11I OAM H O OI L L 5 4 3 2 1 P24 CM2 12 11Digital outputs 11 and 12, CM2Configurable digital outputs 11 and 12 are open collectortransistor outputs (a fig. 110), to which you can connect, forexample, relays (such as ETS4-VS3, Order No. 083094). Theseoutputs can both be used for various functions, for example tosignal when a determined reference frequency is reached or whena fault occurs.CM211, 12Figure 110: Digital output (sink-type)Transistor output: max. 27 V H, 50 mATerminal CM2 is the <strong>com</strong>mon reference potential for digitaloutputs 11 and 12. CM2 can be connected to 0 V in sink-type logicand to +24 V in source-type logic (a fig. 51, page 48).Table 30: Digital outputs 11 and 12PNU Terminal Adjustable inRUN modeValueC021 11 – a table 31 01C022 12 00For a detailed description of the output functions, see the pageslisted in table 31.–+DSTable 31:Functions of the digital outputsValue Function Description a Page00 RUN RUN: In operation 11101 FA1 FA1: <strong>Frequency</strong> referencevalue reached02 FA2 FA2: <strong>Frequency</strong> signal –output frequency exceedsvalue in PNU C042 (duringacceleration ramp) orPNU C043 (duringdeceleration ramp).03 OL OL: Overload warning – motorcurrent exceeds value inPNU C041.04 OD OD, PID control:Reference/actual valuedifference exceeds signallingthreshold set with PNU C044.11111513105 AL AL: Fault – fault/alarm signal 18306 Dc Dc: Warning – reference valueat input O (0 to +10 V) lowerthan value in PNU b082 orcurrent signal at input OIbelow 4 mA. (reference valuesignal interrupted)07 FBV FBV: PID control – actual valuemonitoring (PV) signal onbreach of limit valuesPNU C052/C053. (actualvalue signal interrupted)08 NDc NDc: Fault/warningdependent on PNU C077 –<strong>com</strong>munication watchdogtimer has expired:<strong>com</strong>munications are faulty.09 LOG LOG: Shows result of logic linkperformed throughPNU C143. (High, Low)10 ODc ODc: Fault/warning:Communication overload orinterrupted (with optionalDE51-NET-CAN,DE51-NET-DP). (overload)107