Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB UL ® Caution, Warnings andInstructionshhhField wiring must be made by a UL-listed and CSAcertifiedclosed-loop terminal connector sized for the wiregauge involved. Connector must be fixed by using thecrimping tool specified by the connector manufacturer.Be sure to consider the capacity of the circuit-breakerto be used.Be sure to use larger wires for the power lines if thedistance exceeds 20 meters.Wire Connectorsj Warning!Field wiring connections must be made by a UL Listed andCSA Certified ring lug terminal connector sized for the wiregauge being used. The connector must be fixed using thecrimping tool specified by the connector manufacturer.CableTerminal (ring lug)Cable supportMotor Overload Protection<strong>Moeller</strong> DF51 inverters provide solid state motor overloadprotection, which depends on the proper setting of the followingparameters:• b012 „ electronic overload protection“• b212 „ electronic overload protection, 2 nd motor“Set the rated current [Amperes] of the motor(s) with the aboveparameters. The setting range is 0.2 * rated current to 1.2 * ratedcurrent.j Warning!When two or more motors are connected to the inverter,they cannot be protected by the electronic overloadprotection. Install an external thermal relay on each motor.227