Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Parameter list for userdefinablesettingsPNU Name RUN b031= 10Designation Value range DS Page UsersettingC021C022C026C028C031C032C036C041C241C042DigiOut11DigiOut12DigiOutK1AnalogOUTDigiOut11LogicDigiOut12 logicDigiOutK1LogicOL-LevelOL-Level[2]FA2accLevel– – Digital output 11 – signal 00: RUN: In operation 01 10701: FA1: <strong>Frequency</strong> reference value reached02: FA2: <strong>Frequency</strong> signal – outputfrequency exceeds value in PNU C042(during acceleration ramp) orPNU C043 (during deceleration ramp).03: OL: Overload warning – motor currentexceeds value in PNU C041.04: OD, PID control: Reference/actual valuedifference exceeds signalling thresholdset with PNU C044.05: AL: Fault – fault/alarm signal06: Dc: Warning – reference value at inputO (0 to +10 V) lower than value inPNU b082 or current signal at input OIbelow 4 mA.07: FBV: PID control – actual valuemonitoring (PV) signal on breach oflimit values PNU C052/C053.08: NDc: Fault/warning dependent onPNU C077 – <strong>com</strong>munication watchdogtimer has expired: <strong>com</strong>munications arefaulty.09: LOG: Shows result of logic linkperformed through PNU C143.10: ODc: Fault/warning: Communicationoverload or interrupted (with optionalDE51-NET-CAN, DE51-NET-DP).– – Digital output 12 – signal Values a PNU C021 00 107– – Relay K1 – signal Values a PNU C021 05 110– – Analog output AM, measured 00: f-Out: Current output frequency 00 106value indication selection01: I-Out: Current output current– – Digital output 11 – logic 00: Normally open contact (NO) 01, 00 10801: Normally closed contact (NC)– – Digital output 12 – logic Values a PNU C031 01, 00 108– – Relay K1 (K11-K12) – logic Values a PNU C031 01 110– j Output function – warningthreshold for overload signal (OL)– j Output function – warningthreshold for overload warning(OL)(second parameter set)– j Output function – signallingthreshold for frequency signalFA2 during acceleration0…2 x I e [A]Default, dependent on frequency inverter’srated current (I e )0…2 x I e [A]Default, dependent on frequency inverter’srated current (I e )I e 115I e 1150…400 Hz 0.0 112241