Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Optional modulesCANopen interface module DE51-NET-CANhhhFor notes about fitting see installation instructionsAWA8240-2282.For a detailed description of the interface module, seemanual AWB8240-1571.CANopen interface module DE51-NET-CAN is notincluded as standard with the frequency inverter.The optional DE51-NET-CAN module allows connection of thefrequency inverter to a CANopen network. DE51-NET-CAN can bemounted to the side, preferably the right side, of the DF51 withDE51xxx.Special features:• DIP switches for setting node ID and baud rate• Power supplied through frequency inverter• Isolated bus interface• Status LEDs• Adjustment of all frequency inverter parameters throughCANopen.• Parallel indication of reference and actual values and of allfrequency inverter parameters through optional keypadDEX-KEY-6…hCANopen interface module DE51-NET-CAN is mountedseparately from DF51 with the mounting frameDEX-MNT-NET and connected through the connectioncable DEX-CBL-…-ICS or DNW-PC…Figure 191:DE51-NET-CANTable 40:Overview of technical specificationsCommunication profile DS-301 V4.01Device profile DS 402 V2.0Bus addresses 1…127Data transfer rate10 Kbit/s to 1 Mbit/sMaximum total area coverage (depending on baud rate and repeaters) • Up 5000 m at 10 Kbit/s• Up to 25 m at 1 Mbit/sTransmission mediumScreened, twisted pair cableBus termination resistor120 O, suitable for separate mountingNumber of SDOs1 server, 0 clientsNumber of PDOs4 Rx PDOs, 4 Tx PDOsPDO mappingVariableTerminalsPlug-in, 5-pole terminal block209