Frequency Inverter DF51... - Moeller.com.tr

Serial interface (Modbus)04/07 AWB8230-1541GBCoilnumberhexDesignation Access rights Description0018 <strong>Frequency</strong> reached signal at constantspeedro0 = OFF1 = ON0019 RUN mode signal ro 0 = OFF1 = ON001 A Force data ro 0 = normal status1= force001B CRC fault ro 0 = no fault signal 2)1 = fault signal001C Overflow error ro 0 = no fault signal 2)1 = fault signal001D Bus frame fault ro 0 = no fault signal 2)1 = fault signal001E Parity fault ro 0 = no fault signal 2)1 = fault signal001F Checksum error signal ro 0 = no fault signal 2)1 = fault signal1) The default state is On when one of the control signal terminals (digitalinputs) or a coil is set to On. The control signal terminals have thehighest priority. If the master can not reset the coil, it must be switchedoff through the control signal terminals to set the coil status to Off.2) Transmission errors are held until they are reset. Errors can be resetduring frequency inverter operation.3) Do not use. For DV51 only.158