Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Reference and control signalinputsAcceleration and deceleration characteristicPNU Designation RUN b031 Value Function DS= 10A097Accelerationtime,characteristic– – Here, you can set a linear or an S-curve acceleration characteristic for motor acceleration(first and second time ramp):f0000A098Decelerationtime,characteristic01t00 Linear01 S curve– – 00 Linear 0001 S curveControl signal terminal overview (input)table 20 provides an overview of the digital and analog controlsignal terminal inputs. For a detailed description of each function,see from page 106.Table 20:DesignationBrief description of the functions (digital and analog inputs)Value1)MeaningDescriptionParameterizable digital inputs 1 to 6Parameterizing PNU C001 to C006FWD 00 Clockwise rotation(RUN/STOP)REVFWD2 1P24fMtMFWDREV 01 Anticlockwise rotation(RUN/STOP)1) To activate the function, enter this value in the corresponding parameter.REVFWD input closed: Motor starts up with a clockwise rotating field.FWD input open: Controlled motor deceleration to stop (clockwise rotating field).REV input: As for FWD, but with anticlockwise rotating fieldFWD and REV inputs closed simultaneously: Motor does not start or controlled motor decelerationto stop.75