Frequency Inverter DF51... - Moeller.com.tr

04/07 AWB8230-1541GB Optional modulesConfiguring keypad DEX-KEY--10hBy default, keypad DEX-KEY-10 is configured for use withfrequency inverters DF51, DF6, DV51 and DV6. For theDF5, DV5 and RA-SP devices and for use with severaldifferent device series, the keypad must be reconfigured.Before you configure the keypad, make sure that it is correctlyconnected to the frequency inverter or speed control unit, which,in turn, is connected to its power supply.If the keypad is configured incorrectly (for example assignment ofdevice series), the following fault message appears:R-ERROR COMM. X Switch off the mains voltage and wait until all displays (LCD,LED) are off.X Press and hold the RMT and PRG keys and switch on thekeypad’s power supply.If the keypad is connected to a frequency inverter, the POWER LEDlights up; if it is connected to a speed control unit, the UV LEDlights up.Press RMT and PRGand hold keys. Then switch on the supplyvoltage.LOCAL MODESelectPress and PRG keysRMTENTERSaveCONFIGURATIONDIAGNOSERMTNormalENTERData transfer rate in bits per second[bps]BPS480024004800960019200Default value:DF5, DF51, DV5, DV51, RA-SP, DF6 and DV6OPERATOR TYPESRWZuordnung der GerätereihenDRW2HRWSRWDOP/DRWDF5, DV5 and RA-SPNo assignmentDF51, DF6, DV51, DV6No assignmentLANGUAGE SELECTONSelect languageOFFONDF5, DV5 and RA-SPDF51, DF6, DV51, DV6SET DEFAULTCANCELLEXECUTECANCELLWerkseinstellung der Bedieneinheitaktivieren (DF51, DF6, DV51, DV6)Figure 190:Configuring the keypad205