Temperature Controller - Staveb AG

PrefaceSafety PrecautionsSafety Signal WordsThis manual uses the following signal word to mark safety precautions for theBulletin 900-TC32.These precautions provide important information for the safe application ofthe Bulletin 900-TC32 Temperature Controller. You must make sure to followthe instructions provided in all safety precautions.ATTENTION!Identifies information about practices or circumstancesthat can lead to personal injury or death, property damageor economic lossConventions Used in ThisManualMeanings of AbbreviationsThe following abbreviations are used in parameter names, figures, and in textexplanations. These abbreviations mean the following:Table P.ASymbolPVSPATSTEUTermProcess valueSet pointAuto-tuningSelf-tuningEngineering unit ➊➊ “EU” stands for Engineering Unit. EU is used as the minimum unit for engineering units such as °C, m, and g.The size of EU varies according to the input type. For example, when the input temperature setting range is–200…+1300°C, 1 EU is 1°C, and when the input temperature setting range is –20.0…+500.0°C, 1 EU is0.1°C. In the case of analog input, the size of EU varies according to the decimal point position of the scalingsetting, and 1 EU becomes the minimum scaling unit.Note: For additional definitions, see Appendix D, Glossary.P-i Publication 900-UM003C-EN-E - January 2004