Temperature Controller - Staveb AG

Configuration and Basic Operation 3-5Selecting ParametersTo select various parameters in each function group, press the mode M key.Each press of the M key advances to the next parameter. For details on eachparameter, see Chapter 5 — Parameter Functions and Definitions.Figure 3.3Parameter1Parameter2Parameter3ParameternChanging Parameters and Loading Values into Controller MemoryIf you press the M key at the final parameter, the display returns to the topparameter for the current function group.To change the parameter’s settings or configuration (setup), modify the settingusing the U or D key, and either leave the setting unchanged for at least2 seconds or press the M key. This loads the present value displayed intomemory.When another function group is selected, the parameter and value on thedisplay are the ones currently loaded into controller memory.When you turn the controller’s power OFF, ensure the values are loaded intomemory by pressing the M key. The values and parameter setup aresometimes not changed by merely pressing the U or D key.Publication 900-UM003C-EN-E - January 2004