Temperature Controller - Staveb AG

Preparations 2-7Removing and Attaching the Wiring Terminal PlateThe Bulletin 900-TC32 can be replaced by removing the wiring terminal plate.The field wires will remain attached to the terminal plate for easy replacementof the controller.1. Press in firmly on the fasteners on both sides of the terminals to unlockthe terminal plate and pull upward.Figure 2.42. Remove the terminal plate from the controller.Figure 2.53. Before you insert the terminal plate again, make sure that the controllerpins match the positions of the holes in the terminal plate, and press itinto place on the controller.Figure 2.6Publication 900-UM003C-EN-E - January 2004