Temperature Controller - Staveb AG

B-7Advanced setting function groupParameter initializeFigure B.2 (Continued)αAdvanced PID parameterMulti-SP usesSP ramp set valueMV upper limitMV lower limitLimited to MVcalculation valueStandby sequence reset methodReset conditions after standby sequenceis canceled.Alarm 1 open in alarmSet the alarm output 1 ON/OFF states.Alarm 1 hysteresisInput digital filterSet the time constant in seconds.Additional PV displayDisplayed first in the operation function group.Manipulated variable displayST stable rangeSet the deviation.Automatic return of display modeAutomatic return to operation function groupwhen the keys on the front panel are operated.Move to calibrationfunction groupAlarm 1 latchProtect function groupOperation/adjustment protectionRestricts display and modification of menusin the operation and adjustment function groupsInitial setting communications protectionRestricts display and modification of menusin the initial setup, operation level and adjustmentfunction groups.Setting change protectionProtects changes to setups by operationof the front panel keys.Protect function groupmove timeOutput/input errorCold junction compensating methodMB command logic switchingCommunications setting function groupCommunicationUnit No.Baud rateData bitStop bitParityCommunication setup on other partypersonal computer is different.Publication 900-UM003C-EN-E - January 2004