Temperature Controller - Staveb AG

2-4 PreparationsATTENTION!• Use the Bulletin 900-TC32 Temperature Controllerwithin the rated supply voltage. Not doing so maycause damage or fire.• Configure all controller settings according to thecontrol target of the Bulletin 900-TC32 TemperatureController. If the settings are not appropriate for thecontrol target, the Bulletin 900-TC32 TemperatureController may operate in an unexpected manner,resulting in damage to the product or personal injury.• To maintain safety in the event of a productmalfunction, always take appropriate safety measures,such as installing an alarm on a separate line to preventexcessive temperature rise. If a malfunction preventsproper control, an accident may result.• Do not wire to unused controller terminals.• Make sure to wire properly with correct polarity ofterminals.• To reduce induction noise, separate the high-voltage orlarge-current power lines from other lines, and avoidparallel or common wiring with the power lines whenyou are wiring to the terminals. We recommend usingseparating pipes, ducts, or shielded lines.• Do not use the Bulletin 900-TC32 TemperatureController in the following places which might exceedits specifications:– Places subject to dust or corrosive gases (inparticular, sulfide gas, and ammonia gas)– Places subject to high humidity, condensation, orfreezing– Places subject to direct sunlight– Places subject to vibration and large shocks– Places subject to splashing liquid or oily atmosphere– Places directly subject to heat radiated from heatingequipment– Places subject to intense temperature changesPublication 900-UM003C-EN-E - January 2004