Temperature Controller - Staveb AG

B-3Table B.C Initial Setting Function Group (Continued)Parameter Name Symbol Setting (Monitor) Value Display Default Unit SetValueDirect/ReverseOperationorev Direct operation, reverse operation or-d,or-rAlarm 1 Type alt1 0: Alarm function OFF1: Upper- and lower-limit (deviation range)2: Upper-limit (deviation)3: Lower-limit (deviation)4: Upper- and lower-limit range (deviation range)5: Upper- and lower-limit alarm with standby sequence(deviation range)6: Upper-limit alarm with standby sequence (deviation)7: Lower-limit alarm with standby sequence (deviation)8: Upper-limit (absolute-value)9: Lower-limit (absolute-value)10: Upper-limit with standby sequence(absolute-value)11: Lower-limit with standby sequence(absolute-value)Move to AdvancedSetting FunctionGroupReverseoperationNoneamov –1999…+9999 NoneTable B.D Advanced Setting Function GroupParameter Name Symbol Setting (Monitor) Value Display Default Unit Set ValueParameter Initialize init ON, OFF on, off OFF NoneMulti-SP Uses mspu ON, OFF on, off OFF NoneSP Ramp Set Value sprt OFF, 1…9999 off, 1 to 9999 OFF EUStandby Sequence Reset rest Condition A, Condition B a, b Condition A NoneMethodAlarm 1 Open in Alarm al1n Open in alarm/Close in alarm n-o, n-c Close in alarm NoneAlarm 1 Hysteresis alh1 0.1…999.9 0.2 EUST Stable Range st-b 0.1…999.9 15.0 °C or °Fα (Alpha) alfa 0.00…1.00 0.65 NoneMV Upper Limit ol-h MV lower limit +0.1…105.0105.0 %(standard)0.0…105.0 (heating and cooling) 105.0 %MV Lower Limit ol-l –5.0 to MV upper limit –0.1–5.0 %(standard)–105.0…0.0 (heating and cooling) –105.0 %Input Digital Filter inf 0.1…999.9 0.0 SecondAdditional PV Display puad ON, OFF on, off OFF NonePublication 900-UM003C-EN-E - January 2004