Temperature Controller - Staveb AG

5-28 Parameter Functions and DefinitionsRelated Parameters• Alarm Value 1 (Operation function group) (p. 5-6)• Upper-Limit Alarm Value 1, Lower-Limit Alarm Value 1 (Operationfunction group) (p. 5-7)• Standby Sequence Reset Method (p. 5-31), Alarm 1 Open in Alarm(p. 5-32), Alarm 1 Hysteresis (p. 5-33) (Advanced Setting functiongroup)Advanced Setting FunctionGroupThis function group is for using the Bulletin 900-TC32 to its maximumcapability. To move to this function group, enter the password (–169) in theInitial Setting function group.Figure 5.8Power ONOperationfunction groupInitial settingfunction groupkey1 secondmin.keyless than1 sec.Advanced settingfunction groupAdjustmentfunction groupkey 3 seconds min.keyThe PV display flashesafter one second.Control stopCommunicationssetup functionkey groupless than1 sec.Password inputset value “-169”Password inputset value “1201”Calibrationfunction groupControl in progressControl stopped• The parameters in this function group can be used when InitialSetting/Communications Protection is set to 0.• You can move to the Calibration function group by entering thepassword (1201).Publication 900-UM003C-EN-E - January 2004