Temperature Controller - Staveb AG

A-2Table A.A (Continued)Technical/Control (Continued)Other functionsAccording to controller modelStandards UL3121-1, CSA22.2 No. 1010.1UL Type 4X (equivalent to IP66 for indoor use). Conforms to EN61326,EN61010-1General/EnvironmentalInsulation resistance20 MΩ min. (by 500V DC megger)Dielectric strength2000V AC 50 or 60 Hz 1 min.Vibration Operating 10…55 Hz, 10 m/s 2 (1 G) for 10 min. each in X, Y, and Z directionsNon-operating10…55 Hz, 20 m/s 2 (2 G) for 2 hrs. each in X, Y, and Z directionsShock Operating 200 m/s 2 (20 G) max., 3 times in each 3 axes, 6 directions.Relay: 100 m/s 2 (10 G)Non-operating300 m/s 2 (30 G) max., 3 times in each 3 axes, 6 directions.Relay: 100 m/s 2 (10 G)Protective structure Front panel Type 4X (equivalent to IP66 for indoor use)Rear case IP20, terminals: IP00 (VDE 0106)Memory protection EEPROM (non-volatile memory) (number of writes: 100,000)Weight (includes carton)Approx. 160 g (5.6 ounces)Ambient temperature–10…+55°C (with no condensation or icing)Ambient humidityRelative humidity 25…85%Storage temperature–25…+65°C (with no condensation or icing)Altitude2,000 m or lessInstallation environmentInstallation Category II, Pollution Class 2 (IEC 61010-1 compliant)EMC Emission enclosure EN55011 Group 1 class AEmission AC mainsEN55011 Group 1 class AImmunity ESD EN61000-4-2: 4 kV contact discharge (level 2); 8 KV air discharge (level 3)Immunity RF-interference EN61000-4-3; 10V/m (amplitude modulated, 80 MHz …1 GHz) (level 3)10V/m (pulse modulated, 900 MHz)Immunity conducted disturbance EN61000-4-6: 10V (0.15…80 MHz) (level 3)Immunity burst EN61000-4-4: 2 KV power line (level 3); 2 kV I/O signal-line (level 4)Surge immunity EN61000-4-5: 1 KV line to line (level 2); 2 kV line to ground (level 3)Voltage dips/short interruptionsEN61000-4-11: 100%/0.5 periodPublication 900-UM003C-EN-E - January 2004