Temperature Controller - Staveb AG

5-4 Parameter Functions and DefinitionsFigure 5.3Operation function groupPVPV/SPMulti-SPSet point duringSP rampRun/stopAlarm value 1Upper-limitalarm value 1Lower-limitalarm value 1MV monitor (OUT1)MV monitor (OUT2)Page5-45-55-55-55-65-65-75-75-85-8PV (Process Value)Conditions of Use: The Additional PV Display parameter must be set to ON.Function: The process value (PV) is displayed on the No. 1 display, andnothing is displayed (blank) on the No. 2 display.Table 5.DProcessValueMonitoring RangeInput indication range (see p. A-3)UnitsEUNote: The decimal point position is dependent on the selected sensor.Related Parameters• Input Type (Initial Setting function group) (p. 5-20)• Set Point Upper Limit, Set Point Lower Limit (Initial Setting functiongroup) (p. 5-21)Publication 900-UM003C-EN-E - January 2004