Temperature Controller - Staveb AG

4-16 Parameter Adjustments and Application Considerations2. Select Initial Setting/Communications Protection by pressing the Mkey.Figure 4.33Initial setting/communicationsprotection3. Set the parameter to 0 (move to Advanced Setting function groupenabled).Figure 4.34Initial setup/communicationsprotection4. Press the key and M key simultaneously for at least 1 second tomove from the Protect function group to the Operation function group.Figure 4.35Operation function groupPV/SP5. Press the key for at least 3 seconds to move from the Operationfunction group to the Initial Setting function group.Figure 4.36Initial setting function group6. Select Move to Advanced Setting Function Group by pressing the Mkey.Figure 4.377. Press the D key to enter –169 (password).Figure 4.388. Select Number of Multi-SP Uses by pressing the M key. Set theparameter to ON.Figure 4.39Advanced settingfunction group9. Press the key for at least 1 second to move to the Initial Settingfunction group.Figure 4.40Initial setting function groupPublication 900-UM003C-EN-E - January 2004