Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

More documents

Recommendations

Info

01/02 AWB8230-1413GB Basic functionsBasic functionsInput/display frequency valuePNU F01indicates the current setpoint frequency or the current fixedfrequency. You can change the frequencies with the arrow keys<strong>and</strong> save them according to the setting in PNU A001 <strong>and</strong> thefrequency stages FF1 to FF4 (digital inputs) (a section “Fixedfrequency selection (FF1 to FF4)”, page 68).With PNU F001, you can modify parameters, even whenparameter protection (PNU b031) has been set (a page 81).Input/indication of frequency setpoint valueIf you have not activated any fixed frequencies, PNU F001indicates the setpoint frequency.The setpoint frequency can be assigned in one of three ways,depending on the setting under PNU A001:• through the installed potentiometer on the keypad,PNU A001 = 00;• through analog inputs, PNU A01 = 01 (default):– O (0 to 10 V),– O2 (–10 V to +10 V) or– OI (4 to 20 mA),• through PNU F001 or PNU A020, PNU A001 = 02.If you specify the setpoint frequency with PNU A020,(a page 107), you can enter a new value under PNU F001,which is saved automatically in PNU A020:X To change the value, use the UP <strong>and</strong> DOWN arrow keys.X Save the modified value with the ENTER key.The saved value is automatically written to PNU A020.Displaying/entering fixed frequenciesIf you have activated the fixed frequencies with functions FF1 toFF4 of the digital inputs, PNU F001 displays the selected fixedfrequency.For details about changing the fixed frequencies, seesection “Entering the fixed frequencies in PNU F001”, page 68.PNU Name Adjustable in RUN mode Value Function WENormalExtendedF001Input/indication offrequencysetpoint valuej j 0.0 to 400 Hz Resolution g0.1 HzThe setpoint can be defined using various methods:• With PNU F001 or A020: Enter the value 02 underPNU A001.• Using the potentiometer on the keypad: Enter the value00 under PNU A001.• With a 0 to 10 V or a –10 to +10 V voltage signal or a 4 to20 mA current signal at input terminals O or OI: Enter thevalue 01 under PNU A001.• With the digital inputs configured as FF1 to FF4. Afterselection of the required fixed frequency stage using FF1to FF4, the frequency for the respective stage can beentered.The display of the setpoint value is independent of whichmethod was used to set the setpoint value.0.0Acceleration time 1Acceleration time 1 defines the time in which the motor reaches itsend frequency after a start signal is issued.PNU Name Adjustable in RUN mode Value Function WENormalExtendedF002F202Accelerationtime 1j j 0.01 to 3600 s Resolution of 0.01 s at an input of 0.01 to 99.99Resolution of 0.1 s at 100.0 to 999.9Resolution of 1 s at 1000 to 3600 s30.0105
Setting Parameters01/02 AWB8230-1413GBDeceleration time 1Deceleration time 1 defines the time in which the motor brakes to0 Hz after a stop signal.PNU Name Adjustable in RUN mode Value Function WENormalExtendedF003F203Decelerationtime 1j j 0.1 to 3600 s Resolution of 0.01 s at an input of 0.01 to 99.99Resolution of 0.1 s at 100.0 to 999.9Resolution of 1 s at an input of 1000 to 360030.0Direction of rotationThe direction of rotation defines the direction in which the motorturns after a start signal is issued.PNU Name Adjustable in RUN mode Value Function WENormalExtendedF004Direction ofrotation– – 00 The motor runs in a clockwise direction. 0001 The motor runs in an anticlockwise direction.106
Page 1 and 2:
Hardware a
Page 3 and 4:
• All covers and
Page 5 and 6:
Contents01/02 AWB8230-1413GB4 Opera
Page 7 and 8:
Contents01/02 AWB8230-1413GB- Contr
Page 9 and 10:
601/02 AWB8230-1413GB
Page 11 and 12:
About the DF6 <str
Page 13 and 14:
About the DF6 <str
Page 15 and 16:
About the DF6 <str
Page 17 and 18:
Engineering01/02 A
Page 19 and 20:
Engineering01/02 A
Page 21 and 22:
Engineering01/02 A
Page 23 and 24:
Installation01/02 AWB8230-1413GBMou
Page 25 and 26:
Installation01/02 AWB8230-1413GBWit
Page 27 and 28:
Installation01/02 AWB8230-1413GBFit
Page 29 and 30:
Installation01/02 AWB8230-1413GBEle
Page 31 and 32:
Installation01/02 AWB8230-1413GBCon
Page 33 and 34:
Installation01/02 AWB8230-1413GBThe
Page 35 and 36:
Installation01/02 AWB8230-1413GBPES
Page 37 and 38:
Page 39 and 40:
Installation01/02 AWB8230-1413GBPar
Page 41 and 42:
Page 43 and 44:
Installation01/02 AWB8230-1413GBNo.
Page 45 and 46:
Installation01/02 AWB8230-1413GBhRo
Page 47 and 48:
Installation01/02 AWB8230-1413GBHav
Page 49 and 50:
Operating the DF60
Page 51 and 52:
Operating the DF60
Page 53 and 54:
Operating the DF60
Page 55 and 56:
Operating the DF60
Page 57 and 58: Programming the ControlSignal Termi
Page 105 and 106: 10201/02 AWB8230-1413GB
Page 107: Setting Parameters01/02 AWB8230-141
Page 111 and 112: Setting Parameters01/02 AWB8230-141
Page 113 and 114: ......Setting Parameters01/02 AWB82
Page 155 and 156: Messages01/02 AWB8230-1413GBDisplay
Page 157 and 158: Messages01/02 AWB8230-1413GBOther m
Page 159 and 160:
Messages01/02 AWB8230-1413GBDisplay
Page 161 and 162:
Troubleshooting01/02 AWB8230-1413GB
Page 163 and 164:
Appendix01/02 AWB8230-1413GB<strong
Page 165 and 166:
Appendix01/02 AWB8230-1413GB<strong
Page 167 and 168:
Appendix01/02 AWB8230-1413GBCables
Page 169 and 170:
Appendix01/02 AWB8230-1413GBRFI fil
Page 171 and 172:
Appendix01/02 AWB8230-1413GBPNU Fun
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Index01/02 AWB8230-1413GBFlow contr
show all

Hardware and Engineering DF6-340-... Frequency ... - Moeller.com.tr

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?